Mercedes-Benz G-Class G461 Owner's Manual page 253

Capacities
The following value indicates the total en-
gine capacity.
Engine with oil filter
Replacement amount
Engine oil viscosity
Viscosity describes the flow characteris-
tics of a fluid. If an engine oil has a high vis-
cosity, it means that it is thick; a low
G 280 CDI
viscosity means that it is thin.
6.5 l Select the SAE classification (viscosity) of
the engine oil according to the outside
temperature. The following table shows
you the viscosity classes to be used de-
pending on the average air temperature.
nur für internen Gebrauch
P18.00-2056-31
Technical data
Service products and capacities
Transmission oil
You can use any passenger-vehicle trans-
mission oil that has been tested and ap-
proved for Mercedes-Benz vehicles and
which is listed on overview sheet 236.12 of
the Mercedes Benz Specifications for Serv-
ice Products. The overview sheet can be
seen at any Mercedes-Benz Service Cen-
tre.
!
Do not use lubricant additives. They can lead
to increased wear of, and damage to, the assem-
blies. The use of lubricant additives could result
in a limitation of your warranty entitlement.
251