Grounding And Providing Power To The Srx5400 Services Gateway; Connections - Juniper SRX5400 Hardware Manual

CHAPTER 9
Grounding and Providing Power to the
SRX5400 Services Gateway
Tools and Parts Required for SRX5400 Services Gateway Grounding and Power

Connections

Related
Documentation
Copyright © 2014, Juniper Networks, Inc.
Tools and Parts Required for SRX5400 Services Gateway Grounding and Power
Connections on page 63
Grounding the SRX5400 Services Gateway on page 64
Connecting Power to an AC-Powered SRX5400 Services Gateway on page 65
Powering On an AC-Powered SRX5400 Services Gateway on page 66
Connecting Power to a DC-Powered SRX5400 Services Gateway on page 67
Powering On a DC-Powered SRX5400 Services Gateway on page 70
Powering Off the SRX5400 Services Gateway on page 72
To ground and provide power to the services gateway, you need the following tools and
parts:
Phillips (+) screwdrivers, numbers 1 and 2
2.5-mm flat-blade (–) screwdriver
7/16-in. hexagonal-head external drive socket wrench, or nut driver, with a torque range
between 23 lb-in. (2.6 Nm) and 25 lb-in. (2.8 Nm) tightening torque, for tightening nuts
to terminal studs on each power supply on a DC-powered services gateway.
Wire cutters
Electrostatic discharge (ESD) grounding wrist strap
Overview of Installing the SRX5400 Services Gateway on page 33
Grounding the SRX5400 Services Gateway on page 64
Connecting Power to an AC-Powered SRX5400 Services Gateway on page 65
Connecting Power to a DC-Powered SRX5400 Services Gateway on page 67
63