Troubleshooting The Srx5400 Services Gateway With The Junos Os Cli - Juniper SRX5400 Hardware Manual

CHAPTER 12
Troubleshooting the SRX5400 Services
Gateway Hardware Components

Troubleshooting the SRX5400 Services Gateway with the Junos OS CLI

Related
Documentation
Copyright © 2014, Juniper Networks, Inc.
Troubleshooting the SRX5400 Services Gateway with the Junos OS CLI on page 93
Troubleshooting the SRX5400 Services Gateway with Chassis and Interface Alarm
Messages on page 94
Troubleshooting the SRX5400 Services Gateway with Alarm Relay Contacts on page 94
Troubleshooting the SRX5400 Services Gateway with the Craft Interface
LEDs on page 94
Troubleshooting the SRX5400 Services Gateway with the Component LEDs on page 95
Juniper Networks Technical Assistance Center on page 96
Troubleshooting the SRX5400 Services Gateway Cooling System on page 96
Troubleshooting SRX5400 Services Gateway MPCs on page 97
Troubleshooting SRX5400 Services MICs on page 99
Troubleshooting SRX5400 Services Gateway SPCs on page 99
Troubleshooting the SRX5400 Services Gateway Power System on page 101
The Junos OS command-line interface (CLI) is the primary tool for controlling and
troubleshooting services gateway hardware, Junos OS, routing protocols, and network
connectivity. CLI commands display information from routing tables, information specific
to routing protocols, and information about network connectivity derived from the ping
and traceroute utilities.
You enter CLI commands on one or more external management devices connected to
ports on the Routing Engine.
For information about using the CLI to troubleshoot Junos OS, see the appropriate Junos
OS configuration guide.
Troubleshooting the SRX5400 Services Gateway with Chassis and Interface Alarm
Messages on page 94
Troubleshooting the SRX5400 Services Gateway with Alarm Relay Contacts on page 94
93