Juniper SRX5400 Hardware Manual page 32

SRX5400 Services Gateway Hardware Guide
SRX5400 Services Gateway Craft Interface Power Supply LEDs
Related
Documentation
SRX5400 Services Gateway Craft Interface Card OK/Fail LEDs
Related
Documentation
18
Each power supply has two LEDs on the craft interface that indicate its status. The LEDs,
labeled 0 through 3 , are located near the middle of the craft interface next to the
label. Table 8 on page 18 describes the functions of the power supply LEDs on the craft
interface.
Table 8: Power Supply LEDs on the Craft Interface
Label Color
PEM Green
Red
SRX5400 Services Gateway Craft Interface Overview on page 15
SRX5400 Services Gateway Craft Interface Host Subsystem LEDs on page 17
SRX5400 Services Gateway Craft Interface Card OK/Fail LEDs on page 18
Each slot in the card cage has a pair of LEDs on the craft interface that indicates the
status of the card installed in it. The card LEDs are located along the bottom edge of the
craft interface and are labeled
for the remaining slots.Table 9 on page 18
2
LEDs.
Table 9: Card OK/Fail LEDs
Label Color
Green
OK
Red
FAIL
SRX5400 Services Gateway Craft Interface Overview on page 15
SRX5400 Services Gateway Craft Interface Power Supply LEDs on page 18
SRX5400 Services Gateway Craft Interface Fan LEDs on page 19
State Description
On steadily Power supply is functioning normally.
On steadily Power supply has failed or power input
has failed.
for the bottom slot reserved for the SCB and
0
describes the functions of the
State Description
On steadily The card is functioning normally.
Blinking The card is transitioning online or offline.
Off The card is not online.
On steadily The card has failed.
0/1
and
OK
Copyright © 2014, Juniper Networks, Inc.
PEM
, , and
1
Fail