Juniper SRX5400 Hardware Manual page 76

SRX5400 Services Gateway Hardware Guide
Related
Documentation
62
CAUTION: Do not leave a fiber-optic transceiver uncovered except when
inserting or removing cable. The safety cap keeps the port clean and
prevents accidental exposure to laser light.
CAUTION: Do not leave a fiber-optic transceiver uncovered except when
inserting or removing cable. The safety cap keeps the port clean and
prevents accidental exposure to laser light.
Insert the cable connector into the cable connector port on the faceplate.
3.
NOTE: The transceiver cages and optics on the components are industry
standard parts that have limited tactile feedback for insertion of optics
and fiber. You need to insert the optics and fiber firmly until the latch is
securely in place.
Arrange the cable in the standard or extended cable manager to prevent it from
4.
dislodging or developing stress points. Secure the cable so that it is not supporting its
own weight as it hangs to the floor. Place excess cable out of the way in a neatly coiled
loop. Placing fasteners on the loop helps to maintain its shape.
CAUTION: Avoid bending fiber-optic cable beyond its minimum bend
radius. An arc smaller than a few inches in diameter can damage the cable
and cause problems that are difficult to diagnose.
CAUTION: Do not let fiber-optic cable hang free from the connector. Do
not allow fastened loops of cable to dangle, which stresses the cable at
the fastening point.
Tools and Parts Required for SRX5400 Services Gateway Connections on page 57
Overview of Installing the SRX5400 Services Gateway on page 33
Connecting the SRX5400 Services Gateway to a Network for Out-of-Band Management
on page 58
Connecting the SRX5400 Services Gateway to a Management Console or an Auxiliary
Device on page 59
Connecting the SRX5400 Services Gateway to a Network for Out-of-Band Management
on page 58
Connecting an SRX5400 Services Gateway to an External Alarm-Reporting Device on
page 60
Copyright © 2014, Juniper Networks, Inc.