Connecting The Srx5400 Services Gateway To A Management Console Or An Auxiliary Device; Connecting An Srx5400 Services Gateway To An External Alarm-Reporting; Device - Juniper SRX5400 Hardware Manual

SRX5400 Services Gateway Hardware Guide
Connecting the SRX5400 Services Gateway to Management and Alarm Devices
Connecting the SRX5400 Services Gateway to a Network for Out-of-Band Management
Related
Documentation
58
Connecting the SRX5400 Services Gateway to a Network for Out-of-Band
Management on page 58
Connecting the SRX5400 Services Gateway to a Management Console or an Auxiliary
Device on page 59

Connecting an SRX5400 Services Gateway to an External Alarm-Reporting

Device on page 60
Connecting Network Cables to SRX5400 Services Gateway MICs on page 61
To connect the services gateway Routing Engine to a network for out-of-band
management, connect an Ethernet cable with RJ-45 connectors to the
on the Routing Engine. One Ethernet cable is provided with the services gateway. To
connect to the
ETHERNET
Plug one end of the Ethernet cable
1.
the ETHERNET port on the Routing Engine.
Plug the other end of the cable into the network device.
2.
Figure 22: Ethernet Port
Figure 23: Routing Engine Ethernet Cable Connector
Tools and Parts Required for SRX5400 Services Gateway Connections on page 57
Overview of Installing the SRX5400 Services Gateway on page 33
Connecting the SRX5400 Services Gateway to a Management Console or an Auxiliary
Device on page 59
Connecting an SRX5400 Services Gateway to an External Alarm-Reporting Device on
page 60
Connecting Network Cables to SRX5400 Services Gateway MICs on page 61
port on the Routing Engine:
(Figure 23 on page 58
Figure 22 on page 58
ETHERNET
shows the connector) into
shows the port.
Copyright © 2014, Juniper Networks, Inc.
port