Grounding And Providing Power To The Srx5600 Services Gateway; Connections - Juniper SRX5600 Hardware Manual

CHAPTER 9
Grounding and Providing Power to the
SRX5600 Services Gateway
Tools and Parts Required for SRX5600 Services Gateway Grounding and Power

Connections

Related
Documentation
Copyright © 2014, Juniper Networks, Inc.
Tools and Parts Required for SRX5600 Services Gateway Grounding and Power
Connections on page 71
Grounding the SRX5600 Services Gateway on page 72
Connecting Power to an AC-Powered SRX5600 Services Gateway on page 73
Powering On an AC-Powered SRX5600 Services Gateway on page 75
Connecting Power to a DC-Powered SRX5600 Services Gateway on page 76
Powering On a DC-Powered SRX5600 Services Gateway on page 79
Powering Off the SRX5600 Services Gateway on page 81
To ground and provide power to the services gateway, you need the following tools and
parts:
Phillips (+) screwdrivers, numbers 1 and 2
2.5-mm flat-blade (–) screwdriver
7/16-in. hexagonal-head external drive socket wrench, or nut driver, with a torque range
between 23 lb-in. (2.6 Nm) and 25 lb-in. (2.8 Nm) tightening torque, for tightening nuts
to terminal studs on each power supply on a DC-powered services gateway.
Wire cutters
Electrostatic discharge (ESD) grounding wrist strap
Overview of Installing the SRX5600 Services Gateway on page 39
Grounding the SRX5600 Services Gateway on page 72
Connecting Power to an AC-Powered SRX5600 Services Gateway on page 73
Connecting Power to a DC-Powered SRX5600 Services Gateway on page 76
71