Grounding And Providing Power To The Srx5800 Services Gateway; Connections - Juniper SRX5800 Hardware Manual

CHAPTER 9
Grounding and Providing Power to the
SRX5800 Services Gateway
Tools and Parts Required for SRX5800 Services Gateway Grounding and Power

Connections

Related
Documentation
Copyright © 2014, Juniper Networks, Inc.
Tools and Parts Required for SRX5800 Services Gateway Grounding and Power
Connections on page 95
Grounding the SRX5800 Services Gateway on page 96
Connecting Power to an AC-Powered SRX5800 Services Gateway on page 97
Powering On an AC-Powered SRX5800 Services Gateway on page 101
Connecting Power to a DC-Powered SRX5800 Services Gateway on page 102
Powering On a DC-Powered SRX5800 Services Gateway on page 105
Powering Off the SRX5800 Services Gateway on page 106
To ground and provide power to the services gateway, you need the following tools and
parts:
Phillips (+) screwdrivers, numbers 1 and 2
2.5-mm flat-blade (–) screwdriver
7/16-in. hexagonal-head external drive socket wrench, or nut driver, with a torque range
between 23 lb-in. (2.6 Nm) and 25 lb-in. (2.8 Nm) tightening torque, for tightening nuts
to terminal studs on each power supply on a DC-powered services gateway.
Wire cutters
Electrostatic discharge (ESD) grounding wrist strap
Overview of Installing the SRX5800 Services Gateway on page 47
Grounding the SRX5800 Services Gateway on page 96
Connecting Power to an AC-Powered SRX5800 Services Gateway on page 97
Connecting Power to a DC-Powered SRX5800 Services Gateway on page 102
95