Tools And Parts Required To Replace Srx5400 Services Gateway Hardware; Components - Juniper SRX5400 Hardware Manual

SRX5400 Services Gateway Hardware Guide
Related
Documentation

Tools and Parts Required to Replace SRX5400 Services Gateway Hardware

Components

104
Hot-pluggable FRUs—You can remove and replace these components without powering
off the device, but the routing functions of the system are interrupted when the
component is removed.
Cold-swap-only FRUs—You must power off the device in order to remove, replace, or
add these components.
Table 20 on page 104 lists the FRUs for the services gateway.
Table 20: Field-Replaceable Units
Hot-Removable and Hot-Insertable FRUs
Air filter
Fan tray
Craft interface
AC and DC power supplies (if redundant)
interface transceivers
Tools and Parts Required to Replace SRX5400 Services Gateway Hardware
Components on page 104
To replace hardware components, you must have the tools listed in
Table 21: Tools and Parts Required
Tool or part
7/16-in. nut driver or pliers
Blank panels (if component is not
reinstalled)
Hot-Pluggable
FRUs Cold-Swap-Only FRUs
MPCs Routing Engine
MICs SCB
SPCs
Table 21 on page
Components
Cables and connectors
DC power supply
SCB
MPC
MIC
SPC
Power supply
Routing Engine
Copyright © 2014, Juniper Networks, Inc.
104.