Introduction To The Srx5400 Services Gateway; Srx5400 Services Gateway Description - Juniper SRX5400 Hardware Manual

CHAPTER 1
Introduction to the SRX5400 Services
Gateway

SRX5400 Services Gateway Description

Copyright © 2014, Juniper Networks, Inc.
SRX5400 Services Gateway Description on page 3
SRX5400 Services Gateway Physical Specifications on page 4
SRX5400 Services Gateway Component Redundancy on page 5
The SRX5400 Services Gateway is a high-performance, highly scalable, carrier-class
security device with multiprocessor architecture.
The SRX5400 Services Gateway is 5 rack units (U) tall. You can stack eight services
gateways in a rack that is at least 48 U (89.3 in. or 2.24 m) in height if it has a 1 in. cap
between for increased port density per unit of floor space.
The services gateway provides four slots that you can populate with one Switch Control
Board (SCB) and up to three additional cards of the following types:
Services Processing Cards (SPCs) provide the processing capacity to run integrated
services such as firewall, IPsec, and IDP.
NOTE: The SRX5400 Services Gateway supports only the SPC II
(SRX5K-SPC-4-15-320) and does not support the SRX5K-SPC-2-10-40
SPC.
Modular Port Concentrators (MPCs) provide Ethernet interfaces that connect the
services gateway to your network.
3