Juniper SRX5400 Hardware Manual page 62

SRX5400 Services Gateway Hardware Guide
48
Table 19: Four-Post Rack or Cabinet Mounting Hole Locations (continued)
Hole Distance Above U Division
2 0.88 in. (2.2 cm)
1 0.25 in. (0.6 cm)
To install the mounting shelf on the front rails of a four-post rack or cabinet, or the rails
of an open-frame rack (see
If needed, install cage nuts in the holes specified in
1.
On the back of each rack rail, partially insert a mounting screw into the lowest hole
2.
specified in Table 19 on page
Install the mounting shelf on the back of the rack rails. Rest the bottom slot of each
3.
flange on a mounting screw.
Partially insert the remaining screws into the open holes in each flange of the mounting
4.
shelf.
Tighten all the screws completely.
5.
Figure 19 on page 49 or Figure 20 on page
47.
0.50 U
0.14 U
50):
Table 19 on page 47.
Copyright © 2014, Juniper Networks, Inc.