Juniper SRX5400 Hardware Manual page 31

Related
Documentation
SRX5400 Services Gateway Craft Interface Host Subsystem LEDs
Related
Documentation
Copyright © 2014, Juniper Networks, Inc.
Table 6: Alarm LEDs and Alarm Cutoff/Lamp Test Button
Shape Label Color
Major Red
Alarm
Minor Yellow
Alarm
ACO/LT –
SRX5400 Services Gateway Craft Interface Overview on page 15
SRX5400 Services Gateway Craft Interface Alarm Relay Contacts on page 21
SRX5400 Services Gateway Craft Interface Host Subsystem LEDs on page 17
The host subsystem has three LEDs, located on the upper left of the craft interface, that
indicate its status. The LEDs labeled
in slot . The LEDs labeled
0
describes the functions of the host subsystem LEDs.
Table 7: Host Subsystem LEDs
Label Color
Green
MASTER
Green
ONLINE
Red
OFFLINE
SRX5400 Services Gateway Craft Interface Overview on page 15
SRX5400 Services Gateway Craft Interface Alarm LEDs and Alarm Cutoff/Lamp Test
Button on page 16
SRX5400 Services Gateway Craft Interface Power Supply LEDs on page 18
Chapter 2: SRX5400 Services Gateway Hardware Components
State Description
On Critical alarm LED—Indicates a critical condition
steadily that can cause the device to stop functioning.
Possible causes include component removal,
failure, or overheating.
On Warning alarm LED—Indicates a serious but
steadily nonfatal error condition, such as a maintenance
alert or a significant increase in component
temperature.
– Alarm cutoff/lamp test button—Deactivates
major and minor alarms. Causes all LEDs on the
craft interface to light (for testing) when pressed
and held.
show the status of the Routing Engine and SCB
RE0
are disabled and have no function.
RE1
State Description
On steadily Host is functioning as the master.
On steadily Host is online and is functioning normally.
On steadily Host is installed but the Routing Engine
is offline.
Off Host is not installed.
Table 7 on page 17
17