Juniper SRX5400 Hardware Manual page 104

SRX5400 Services Gateway Hardware Guide
Related
Documentation
Storing an SRX5400 Services Gateway Card
90
Figure 33: Do Not Rest the Card on an Edge
If you must rest the card temporarily on an edge while changing its orientation between
vertical and horizontal, use your hand as a cushion between the edge and the surface.
Routine Maintenance Procedures for the SRX5400 Services Gateway on page 81
Tools and Parts Required to Maintain the SRX5400 Services Gateway on page 81
SRX5400 Services Gateway Card Terminology on page 88
Storing an SRX5400 Services Gateway Card on page 90
You must store a card as follows:
In the services gateway chassis
In the container in which a spare card is shipped
Horizontally and sheet metal side down
When you store a card on a horizontal surface or in the shipping container, always place
it inside an antistatic bag. Because the card is heavy, and because antistatic bags are
fragile, inserting the card into the bag is easier with two people. To do this, one person
holds the card in the horizontal position with the faceplate facing the body, and the other
person slides the opening of the bag over the card connector edge.
If you must insert the card into a bag by yourself, first lay the card horizontally on a flat,
stable surface, sheet metal side down. Orient the card with the faceplate facing you.
Copyright © 2014, Juniper Networks, Inc.