Srx5400 Services Gateway Host Subsystem Description - Juniper SRX5400 Hardware Manual

SRX5400 Services Gateway Hardware Guide
Related
Documentation

SRX5400 Services Gateway Host Subsystem Description

Related
Documentation
12
Figure 5: Typical SPC
For detailed information about SPCs supported by the services gateway, see the
SRX5600, and SRX5800 Services Gateway Card Reference
Installing an SRX5400 Services Gateway SPC on page 133
SRX5400 Services Gateway Card Cage and Slots on page 9
Maintaining SPCs and MPCs on the SRX5400 Services Gateway on page 84
Troubleshooting SRX5400 Services Gateway SPCs on page 99
SRX5400 Services Gateway FRUs on page 103
The host subsystem is composed of a Routing Engine installed in a Switch Control Board
(SCB). The host subsystem provides the routing and system management functions of
the services gateway. You must install one host subsystem on the device.
The host subsystem has three LEDs that display its status. The host subsystem LEDs are
located in the middle of the craft interface.
SRX5400 Services Gateway Craft Interface Host Subsystem LEDs on page 17
SRX5400 Services Gateway SCB Description on page 13
SRX5400 Services Gateway Routing Engine Description on page 14
SRX5400 Services Gateway Card Cage and Slots on page 9
SRX5400,
at
www.juniper.net/techpubs/
Copyright © 2014, Juniper Networks, Inc.
.