Tools Required To Install The Srx5400 Services Gateway With A Mechanical; Lift; Installing The Srx5400 Services Gateway Using A Mechanical Lift - Juniper SRX5400 Hardware Manual

CHAPTER 7
Installing the SRX5400 Services Gateway
Tools Required to Install the SRX5400 Services Gateway with a Mechanical Lift
Related
Documentation

Installing the SRX5400 Services Gateway Using a Mechanical Lift

Copyright © 2014, Juniper Networks, Inc.

Tools Required to Install the SRX5400 Services Gateway with a Mechanical

Lift on page 53
Installing the SRX5400 Services Gateway Using a Mechanical Lift on page 53
To install the services gateway, you need the following tools:
Mechanical lift
Phillips (+) screwdrivers, number 2
Overview of Installing the SRX5400 Services Gateway on page 33
Tools and Parts Required for SRX5400 Services Gateway Connections on page 57
Installing the SRX5400 Services Gateway Using a Mechanical Lift on page 53
Because of the services gateway's size and weight—up to 220 lb (100 kg) depending on
the configuration—we strongly recommend that you install the services gateway using
a mechanical lift. If you do not use a lift to install the services gateway, see
Installing the SRX5400 Services Gateway Without a Mechanical Lift" on page 211
complete instructions to install the services gateway safely.
CAUTION: Before front mounting the services gateway in a rack, have a
qualified technician verify that the rack is strong enough to support the
services gateway's weight and is adequately supported at the installation
site.
To install the services gateway using a lift (see
Ensure that the rack is in its permanent location and is secured to the building. Ensure
1.
that the installation site allows adequate clearance for both airflow and maintenance.
Load the services gateway onto the lift, making sure it rests securely on the lift platform.
2.
Figure 21 on page 54):
"Overview of
for
53