Installing The Srx5400 Services Gateway Using A Mechanical Lift; Tools Required To Install The Srx5400 Services Gateway With A Mechanical; Lift - Juniper SRX5400 Hardware Manual

CHAPTER 17
Installing the SRX5400 Services Gateway
Using a Mechanical Lift
Tools Required to Install the SRX5400 Services Gateway with a Mechanical Lift
Related
Documentation

Installing the SRX5400 Services Gateway Using a Mechanical Lift

Copyright © 2017, Juniper Networks, Inc.

Tools Required to Install the SRX5400 Services Gateway with a Mechanical

Lift on page 143
Installing the SRX5400 Services Gateway Using a Mechanical Lift on page 143
To install the services gateway, you need the following tools:
Mechanical lift
Phillips (+) screwdrivers, number 2
Overview of Installing the SRX5400 Services Gateway on page 131
Tools and Parts Required for SRX5400 Services Gateway Connections on page 183
Installing the SRX5400 Services Gateway Using a Mechanical Lift on page 143
Because of the services gateway's size and weight—up to 220 lb (100 kg) depending on
the configuration—we strongly recommend that you install the services gateway using
a mechanical lift. If you do not use a lift to install the services gateway, see
Installing the SRX5400 Services Gateway Without a Mechanical Lift" on page 147
complete instructions to install the services gateway safely.
CAUTION: Before front mounting the services gateway in a rack, have a
qualified technician verify that the rack is strong enough to support the
services gateway's weight and is adequately supported at the installation
site.
"Overview of
for
143