Front Panel Leds; Front Panel Pushbutton; Table 9. Scm Leds; Table 10. Scm Pushbutton - ADTRAN OPTI-6100 Installation Manual

OPTI-6100 Installation and Turn-Up Practice

Front Panel LEDs

The OPTI-6100 SCM provides front panel LEDs to display status information.
Table 9 lists descriptions of the SCM front panel LEDs.
Label Status
Off
STATUS
Green
2
Flashing Green
Off
ALARM
Yellow
Red
2
Flashing Red
Off
ACO
Green
Off
HST
Green
The SCM2 adds the following LEDs:
Off
ENET
Green
2 Flashing Green
Off
ENET2
Green
2 Flashing Green

Front Panel Pushbutton

Table 10 describes the SCM
Label Function
Press to disable audible alarms. Visual alarms remain active.
ACO
Press and hold to test LEDs.
54

Table 9. SCM LEDs

Indication
Lack of power or power failure
Power up and initialization OK; Module is In Service (IS)
Firmware download in progress; Module is IS
No alarms active
Minor alarm active
Major alarm active
Critical alarm active
Alarm Cut-Off not active
Alarm Cut-Off active
Client shelf
Host shelf
Rear panel Ethernet link down or disabled
Rear panel Ethernet link is up
Rear panel Ethernet link is up with activity
Front panel Ethernet link down or disabled
Front panel Ethernet link is up
Front panel Ethernet link is up with activity
pushbutton.
ACO

Table 10. SCM Pushbutton

61184500L1-5L