ADTRAN OPTI-6100 Installation Manual page 380

OPTI-6100 Installation and Turn-Up Practice
17. From the Select Drop menu, select the tributary module to be mapped, and press
18. From the Select Port menu, select
19. From the Select STS-1 Payload Type menu, select
20. Type to copy this mapping to the mate card also.
Y
21. Press three times to return to the OPTI-6100 Main menu.
E
SC
22. From the Main menu, select
23. From the MS Modules menu, select a tributary module to be configured, and press
24. From the Line card menu, select
25. From the Provisioning menu, select
26. From the Equipment Provisioned State menu, select
27. From the Provisioning menu, select
28. From the Facility Provisioning menu, select
29. From the Facility Provisioned State menu, select
30. From the DS1 #1 menu, select
31. Press two times to return to the
E
SC
32. From the Provisioning menu, select
33. From the Line Length menu, select
34. From the Facility #1 menu, select the line length for the facility and press
35. Press to return to the Line card menu.
E
SC
36. From the Provisioning menu, select
37. From the Line Coding menu, select
38. From the Facility #1 menu, select
provisioned on the DS1 test set.
39. Press two times to return to the Line card menu.
E
SC
40. From the Line card menu, select
41. From the Test menu, select
42. From the DS1 #1 menu, select
43. Verify on the DS1 test set that the test pattern was returned as sent.
44. From the Test menu, select
45. From the DS1 #1 menu, select
46. Press two times to return to the Line card menu.
E
SC
47. Move the test set connections to the MDF to the next DS1 under test.
48. Repeat steps 24
A-4
Port #1
MS Modules
Provisioning
Equipment Provisioned State
Facility Provisioning
OOS-MA (Out of Service, Maintenance)
Provisioning
DS1 Line Length
Facility #1
DS1 Line Coding
Facility #1
B8ZS
, and press
Test
, and press
DS1 #1
Line Loop
, and press
DS1 #1
No Loop
through 47 for DS1 #2-28 and select the appropriate DS1 when prompted.
, and press .
E
NTER
VT1.5 (GR-253 Numbered)
, and press .
E
NTER
, and press
E
NTER
IS (In Service)
, and press
Facility Provisioned State
, and press
DS1 #1
menu.
, and press
, and press
E
NTER
, and press
, and press
E
NTER
, and press . This should match what is
E
NTER
.
E
NTER
.
E
NTER
, and press .
E
NTER
.
E
NTER
, and press .
E
NTER
, and press
.
, and press .
E
NTER
, and press
E
NTER
.
E
NTER
, and press
E
NTER
.
E
NTER
, and press
E
NTER
.
E
NTER
.
.
E
NTER
.
E
NTER
.
61184500L1-5L
.
E
NTER
.
E
NTER
.
E
NTER
.
.
.