Figure 60. Available Dcc Facilities Menu; Table 51. Available Dcc Facilities Menu Options - ADTRAN OPTI-6100 Installation Manual

OPTI-6100 Installation and Turn-Up Practice
Available DCC Facilities Menu — Create a New DCC Interface
Main\System Controller\Provisioning\Network Management\SONET SDCC
Create a New DCC Interface
Use the Available DCC Facilities menu
Interface.
TID: HSV00001
Unacknowledged Alarms: None
(C)reate a DCC interface on a non-existing MS facility
Table 51 lists the options in the Available DCC Facilities menu.

Table 51. Available DCC Facilities Menu Options

Hot Key Description
Enter a number
#
and press
Create a DCC interface on
C
a non-existing MS facility
116
(Figure
Available DCC Facilities
1.
Selection :

Figure 60. Available DCC Facilities Menu

Function
This option displays the
. DCC Interface"
E
NTER
This hot key pre-provisions a DCC interface for an empty MS
slot, on the assumption that a tributary module that supports
DCC interfaces is to be installed.
Enter a slot and facility as prompted. The DCC Interface menu
that appears is identical to the that appears to create a DCC
interface on an existing facility.
Provisioning\Create a New DCC Interface\
60) to select the facility to support the new DCC
OPTI-6100 System
High Speed 1
"DCC Interface Menu — Create a New
on page 117.
MM/DD/YY hh:mm
MX Chassis: 1
61184500L1-5L