Fiber Connection And Routing; Table 133. Oc-12 Sfps Supported On The Omm312V - ADTRAN OPTI-6100 Installation Manual

OPTI-6100 Installation and Turn-Up Practice

Table 133. OC-12 SFPs Supported on the OMM312V

SFP Part Number
OC-12 SFPs
SFP12L 1184544P1
SFP12I 1184544P2
SFP12L2 1184544P5
OC-12 CWDM SFPs
SFP12C9 1442703PG9
SFP12C2 1442703PG2
SFP12C3 1442703PG3
SFP12C4 1442703PG4
SFP12C5 1442703PG5
SFP12C6 1442703PG6
SFP12C7 1442703PG7
SFP12C8 1442703PG8
* = For CWDM and single-fiber/BiDi applications, refer to the OPTI-6100 Overview, Engineering, Applications, and
Ordering Practice (P/N 61184500L1-7).
NOTICE
Each SFP provides different optical specifications.
Only SFPs supplied by ADTRAN operate with ADTRAN modules. Use
of other SFPs causes alarm conditions.

Fiber Connection and Routing

Identify the fiber conductors to be terminated on the OMM module, and insert the connectors
into the or jacks as appropriate. See
IN OUT
242
Specifications
Long Reach-1 (1310 nm), single-mode
Intermediate Reach, single-mode
Long Reach-2 (1550 nm), single-mode
CWDM, 1471 nm
CWDM, 1491 nm
CWDM, 1511 nm
CWDM, 1531 nm
CWDM, 1551 nm
CWDM, 1571 nm
CWDM, 1591 nm
CWDM, 1611 nm
Figure 144
Notes
CWDM SFPs are used in
Coarse-Wavelength Division
Multiplexing applications*.
on page 240 (left) for fiber routing.
61184500L1-5L