Table 158. Gefmeh Provisioning Options - ADTRAN OPTI-6100 Installation Manual

Table 158 lists the minimum factory defaults and values that are loaded after installation and
self-test for the GEFMEH module.
Provisioning Options
Equipment Provisioned State
Facility Provisioned State
AINS Time
AINS Timer
VLAN Mode
Protocol ID (Double Tag only)
Port Provisioning Options (VLAN Mode noted)
Peak Rate (Transparent, Double Tag)
VLAN Uplink Tag (Double Tag only)
VLAN Uplink (Double Tag only)
Translation #1–#6, Untagged Translation
(Translation only):
Protocol
Pause Frames
Burst Size
Refer to "Appendix C, Advanced Ethernet Provisioning"
provisioning options.
61184500L1-5L

Table 158. GEFMEH Provisioning Options

Settings
♦ IS
OOS-MA
♦
IS
♦
OOS-MA
♦
1 Minute to 96 Hours; 4:00 is the default
♦ Enabled
♦ Transparent (default)
♦ Double Tag
0×9100 (default)
♦
0×8100
♦
5 – 100000 or Full Rate; Full Rate is the default
1 – 4093; 1 is the default
1 is the only option
The only option is Inactive
♦ GFP (default)
Enabled (default)
♦
32 – 4194 kb; 64 is the default
Tributary Module Installation and Turn-Up
♦ OOS-MA UAS (default)
OOS-MA UAS (default)
♦
♦ Disabled (default)
♦ Translation
Other
♦
♦ X.86
Disabled
♦
for more details on various Ethernet
315