Module Copy Provisioning Screen; Figure 37. Module Copy Provisioning Screen (Mx Chassis) - ADTRAN OPTI-6100 Installation Manual

OPTI-6100 Installation and Turn-Up Practice

Module Copy Provisioning Screen

Main\System Controller\Provisioning\HS/MS Module
Module Copy Provisioning
Use the Module Copy Provisioning screen
module to another, compatible module.
To select a source module, enter A or B for an OMM module, or an MS slot number for a
tributary module. Any module in the chassis that is compatible with the selected source begins
to blink in the display.
To select a destination module, enter A or B for an OMM module, or an MS slot number for a
tributary module. More than one compatible destination can be selected at one time.
NOTE
The MS slot numbers differ by chassis:
1–4 in an SMX chassis
♦
1–12 in an MX chassis
♦
1–24 in an LMX chassis
♦
TID: PHX-JMR
Unacknowledged Alarms:
Inverse = Source
Select Source (A-HS1/B-HS2, MS1..MS12):

Figure 37. Module Copy Provisioning Screen (MX Chassis)

84
Provisioning\Module Copy Provisioning\
(Figure 37) to copy provisioning settings from one
OPTI-6100 System
Module Copy Provisioning
HS1 - OMM-12...... [No Alarms]
HS2 - ............ [No Alarms]
MS1 - DS3EC1M..... [No Alarms]
MS2 - ............ [No Alarms]
MS3 - O3TM........ [No Alarms]
MS4 - ............ [No Alarms]
MS5 - GECM........ [No Alarms]
MS6 - ............ [No Alarms]
MS7 - TRAM........ [No Alarms]
MS8 - TRAM........ [No Alarms]
MS9 - DS1VM....... [No Alarms]
MS10 - ............ [No Alarms]
MS11 - ............ [No Alarms]
MS12 - ............ [No Alarms]
Blink = Candidate
MM/DD/YY HH:MM
MX Chassis:
Underline = Copy Complete
1
61184500L1-5L