Fiber Connection And Routing; Table 162. Sfps Supported On The O12Tme - ADTRAN OPTI-6100 Installation Manual

OPTI-6100 Installation and Turn-Up Practice
SFP Part Number
OC-12 SFPs
SFP12L 1184544P1
SFP12I 1184544P2
SFP12L2 1184544P5
OC-12 CWDM SFPs
SFP12C9 1442703PG9
SFP12C2 1442703PG2
SFP12C3 1442703PG3
SFP12C4 1442703PG4
SFP12C5 1442703PG5
SFP12C6 1442703PG6
SFP12C7 1442703PG7
SFP12C8 1442703PG8
* = For CWDM and single-fiber/BiDi applications, refer to the OPTI-6100 Overview, Engineering, Applications, and
Ordering Practice (P/N 61184500L1-7).
NOTICE
Each SFP provides different optical specifications.
Only SFPs supplied by ADTRAN operate with ADTRAN modules. Use
of other SFPs causes alarm conditions.

Fiber Connection and Routing

Identify the fiber conductors to be terminated on the OC-3/OC-12 tributary module, and insert
the connectors into the
NOTICE
To avoid pinching the fibers between the module faceplate and the
edge of the chassis, route the fibers through the guides on the
module and out along the top edge of the front panel, as illustrated
in Figure 168
326

Table 162. SFPs Supported on the O12TME

Specifications
Long Reach-1 (1310 nm), single-mode
Intermediate Reach, single-mode
Long Reach-2 (1550 nm), single-mode
CWDM, 1471 nm
CWDM, 1491 nm
CWDM, 1511 nm
CWDM, 1531 nm
CWDM, 1551 nm
CWDM, 1571 nm
CWDM, 1591 nm
CWDM, 1611 nm
or jacks as appropriate.
IN OUT
on page 324 (right).
Notes
CWDM SFPs are used in
Coarse-Wavelength Division
Multiplexing applications*.
61184500L1-5L