Dcc Provisioning On Tributary Modules; Table 165. Dcc Channels Per Tributary Module - ADTRAN OPTI-6100 Installation Manual

OPTI-6100 Installation and Turn-Up Practice

DCC Provisioning on Tributary Modules

Table 165 lists the tributary modules which support SONET DCC channels.
NOTE
The maximum number of mid-speed DCC channels is governed by
the module types installed in the chassis. The LMX chassis limits the
mid-speed DCC channels to a maximum of 12.
To provision DCC on the tributary modules, complete the following steps:
1. From the OPTI-6100 Main menu, select
2. From the System Controller menu, select
3. From the Provisioning menu, select
4. From the Network Management menu, select
5. From the SONET DCC Provisioning menu, select
6. From the SONET DCC Upper Layers Provisioning menu, select
.
E
NTER
7. Enter the assigned
NOTE
The NSAP Area Address is assigned once per chassis, and is common
to all DCCs through that chassis. Once the NSAP Area Address is
assigned, it does not have to be assigned again.
334

Table 165. DCC Channels per Tributary Module

Tributary Module
Optical Tributary Modules
O3TMIR
O3TMLR
O3TMM
O3TME
O12TME
DS3/EC1 Tributary Modules
DS3EC1M
DS3EC1M3
DS3M3E
DS3M3T
Network Management
NSAP Area Address,
, and press
System Controller
, and press
Provisioning
, and press
SONET SDCC Provisioning
Upper Layers Provisioning
and press .
E
NTER
DCC Channels
1
1
1
1
1
1
3
3
3
.
E
NTER
.
E
NTER
.
E
NTER
, and press
, and press
NSAP Area Address
.
E
NTER
.
E
NTER
, and press
61184500L1-5L