Figure 174. Pre-Provisioning Options - ADTRAN OPTI-6100 Installation Manual

5. Select an available option, and press
A prompt appears, requiring the mapping to be preprovisioned as Ethernet or non-
Ethernet, as illustrated in
NOTE
If the MS slot is already occupied by a tributary module, it can no
longer be pre-provisioned.
TID: PHX-JMR
Unacknowledged Alarms:
6. Select or
Ethernet
If Ethernet is selected, a further prompt for a port assignment appears.
To create a hairpin mapping, select cards in both panes. To create a loopback, select the same
item in both panes. Passthroughs cannot be created in this menu. Refer to
page 349.
61184500L1-5L
Figure 174.
OPTI-6100 System
Preprovision MS2 as...
1. Ethernet (VCat support)
2. Other
Selection:
'?' - System Help Screen

Figure 174. Pre-Provisioning Options

, and press
Other E
NTER
.
E
NTER
.
Mapping Cross-Connects
MM/DD/YY HH:MM
Chassis: 1 Slot: HS1
"Passthroughs" on
343