Ds1 Framing; Figure 153. Ds1 Framing Menu - ADTRAN OPTI-6100 Installation Manual

DS1 Framing

Each facility in the DS1VME and DS1VMT modules support independent framing.
To provision the framing settings for each facility, complete the following steps:
1. From the DS1VME or DS1VMT module menu, select
2. From the Provisioning menu, select
Figure 153 illustrates the DS1VME/DS1VMT Framing menu.
TID: HSV00001
Unacknowledged Alarms:
1. Facility # 1 : Auto (ESF)
2. Facility # 2 : Auto (ESF)
3. Facility # 3 : Auto (ESF)
4. Facility # 4 : Auto (ESF)
5. Facility # 5 : Auto (ESF)
6. Facility # 6 : Auto (ESF)
7. Facility # 7 : Auto (ESF)
8. Facility # 8 : Auto (ESF)
9. Facility # 9 : Auto (ESF)
10. Facility #10 : Auto (ESF)
11. Facility #11 : Auto (ESF)
12. Facility #12 : Auto (ESF)
13. Facility #13 : Auto (Unframed)
14. Facility #14 : Auto (Unframed)
15. Facility #15 : Auto (Unframed)
3. From the Framing menu, select a facility or
If selecting an individual facility, skip to
4. Enter the numbers of each facility to be set:
Specify individual facilities by numbers delimited by commas.
♦
Specify a range of facilities by start and end numbers separated by a hyphen.
♦
Specify individual facilities and ranges by using commas and hyphens accordingly.
♦
Type to set all facilities.
♦
all
5. Press .
E
NTER
6. From the next menu, select a Framing type, and press
61184500L1-5L
, and press
Framing
OPTI-6100 System
Framing
Selection:
'?' - System Help Screen

Figure 153. DS1 Framing Menu

Set Multiple
step
Tributary Module Installation and Turn-Up
, and press
Provisioning
.
E
NTER
Chassis: 1
16. Facility #16 : Auto (Unframed)
17. Facility #17 : Auto (Unframed)
18. Facility #18 : Auto (Unframed)
19. Facility #19 : Auto (Unframed)
20. Facility #20 : Auto (Unframed)
21. Facility #21 : Auto (Unframed)
22. Facility #22 : Auto (Unframed)
23. Facility #23 : Auto (Unframed)
24. Facility #24 : Auto (Unframed)
25. Facility #25 : Auto (Unframed)
26. Facility #26 : Auto (Unframed)
27. Facility #27 : Auto (Unframed)
28. Facility #28 : Auto (Unframed)
30. Set Multiple
, and press
6.
.
E
NTER
.
E
NTER
MM/DD/YY hh:mm
Slot: MS7
.
E
NTER
275