Client Shelf Management Menu; Figure 65. Client Shelf Management Menu; Table 56. Client Shelf Management Menu Options - ADTRAN OPTI-6100 Installation Manual

OPTI-6100 Installation and Turn-Up Practice

Client Shelf Management Menu

Main\System Controller\Provisioning\TL1\Client Shelf Management\
Client Shelf Management
Use the Client Shelf Management menu
a unique Target Identifier (TID), or if it is to be managed under the TID of the Host shelf.
NOTE
This option is only visible if Interbank Comm. Mode is Client. Refer
to "Interbank Comm. Mode Menu"
TID: PHX-JMR
Unacknowledged Alarms:
Table 56 lists the options in the Client Shelf Management menu.

Table 56. Client Shelf Management Menu Options

Option Description
1 Intelligent NE
2 Expansion Shelf
124
(Figure
OPTI-6100 System
Client Shelf Management : Intelligent NE
1. Intelligent NE
2. Expansion Shelf
Selection :
'?' - System Help Screen

Figure 65. Client Shelf Management Menu

Function
This selection defines a chassis managed by an NMA under a unique
TID. An OPTI-6100 in this mode can be used as a stand-alone chassis
or as a Client on an RS-485 daisy-chain. This mode requires a unique
TID (see previous page), but all chassis have a Chassis Number of 1.
This is the default.
This selection defines a Client chassis managed under the TID (refer to
"TID" on page 123) of the Host chassis. Subtended Expansion Shelves
are automatically assigned the TID of the Host, and must be
provisioned with a unique Chassis Number (2–254) during system
turn-up.
The Host chassis is always Chassis Number 1.
65) to specify if a Client OPTI-6100 is to have
on page 81.
MX Chassis:
MM/DD/YY HH:MM
1
61184500L1-5L