Suzuki SY413 Service Manual page 2378

1. Outer garnish mounting screw
2. Rear sash mounting screw
7) Remove rear door center pillar garnish.
1. Center pillar garnish
8) Remove outer garnish.
9) Lower window fully, then remove rear sash mounting screw.
10) Remove glass fitting screws. Then, take out door glass togeth-
er with bottom channel.
11) Detach glass from bottom channel.
1. Door glass
2. Screws
3. Bottom channel
INSTALLATION
Reverse removal procedure for installation, and then noting the fol-
lowing instructions.
However, be careful of following points.
When installing glass to bottom channel, coat channel with soap
water and tap it with a plastic hammer. Glass-fitted position of
bottom channel is as shown left.
Dimension "a": 234 – 237 mm (9.21 – 9.33 in.)
1. Bottom channel
Securely seal door sealing cover with adhesive.
1. Door sealing cover
CAUTION:
When removing center pillar garnish, slide it down
first. Attempting removal without doing so will cause
claws on the back of center pillar.
BODY SERVICE 9-9