Suzuki SY413 Service Manual page 2841

6A1-12 ENGINE MECHANICAL (G13/G16 TYPE ENGINE)
THROTTLE BODY AND INTAKE MANIFOLD
1. Intake manifold 6. Fuel pressure regulator
2. Throttle body 7. EVAP canister purge valve
3. Gasket 8. MAP sensor
4. Fuel delivery pipe 9. Intake manifold stiffener
5. Fuel injector 10. EGR valve
1. Drain plug
2. Radiator
3. A / T fluid hose (A / T only)
REMOVAL
1) Relieve fuel pressure according to procedure described in Sec-
tion 6.
2) Disconnect negative cable at battery.
3) Drain cooling system.
WARNING:
To help avoid danger of being burned, do not remove
drain plug and radiator cap while engine and radiator
are still hot. Scalding fluid and steam can be blown out
under pressure if plug and cap are taken off too soon.
4) Disconnect accelerator cable from throttle body.