[A]
[B]
[A]: Hatch-back model
[B]: Wagon model
[A]
[B]
[A]: Hatch-back model
[B]: Wagon model
INSTALLATION
Reverse removal procedure for installation, and then noting the fol-
lowing instructions.
Securely connect coupler.
1. Coupler
Adjust door latch striker so that striker shaft approximately aligns
with the center of groove of door latch.
1. Door latch
2. Striker shaft
Adjust door by rubber cushion.
Rubber cushion installed at each side of back door is of screw-
adjustable type. Turn cushion to adjust door for proper position.
After installing all parts and adjusting properly, check back door
for proper operation (open close and lock).
1. Back door cushion
BODY SERVICE 9-13