Suzuki SY413 Service Manual page 2433

9-64 BODY SERVICE
1. Nut
2. Bolt
1. Sliding roof deflector
5) Remove control relay and disconnect lead wire coupler of slid-
ing roof drive gear assembly.
6) Remove sliding roof assembly and take it outside from front
seat side.
DISASSEMBLY
1) Remove sunshade trim stopper.
2) Pull out sunshade trim by sliding it.
3) Remove roof drip rear channel by pushing claw as shown in fig-
ure.
1. Roof drip rear channel
2. Flat tip screwdriver
4) Remove sliding roof drive gear assembly and control relay.
5) Move link to rearward while folding it in such way that resin part
of sliding roof drive cable will pass through rail.
6) Remove sliding roof deflector.
CAUTION:
When moving it, apply force to arrow marked part
(where sliding roof drive cable is installed).