Suzuki SY413 Service Manual page 2868

12) Remove timing belt and camshaft as previously outlined.
13) Loosen cylinder head bolts in such order as indicated in figure
14) Check all around cylinder head for any other parts required to
"1": Camshaft pulley side
"2": Distributor side
15) Remove cylinder head with intake manifold, exhaust manifold
ENGINE MECHANICAL (G13/G16 TYPE ENGINE) 6A1-39
and remove them.
Special Tool
(A): 09900-00415
(B): 09900-00411
be removed or disconnected and remove or disconnect what-
ever necessary.
and distributor, using lifting device.