Suzuki SY413 Service Manual page 2485

9J-16 AIR BAG SYSTEM
USE OF SPECIAL TOOL
WARNING:
To avoid deployment when troubleshooting the air bag system, do not use electrical test equipment
such as a battery powered or AC powered voltmeter, ohmmeter, etc., or any type of electrical equip-
ment other than that specified in this manual. Do not use a non-powered probe type tester.
Instructions in this manual must be followed carefully, otherwise personal injury may result.
You should be familiar with the tools listed in "SPECIAL TOOL" in this section. You should be able to measure
voltage and resistance. You should be familiar with proper use of a scan tool such as the SUZUKI scan tool Diag-
nostic Computer, Driver/Passenger Load Tool, Pretensioner Service Adapter Kit (For air bag system with seat
belt pretensioner), Connector Test Adapter Kit and the Digital Multimeter.
DIAGNOSIS
Connector Test Adapter kit
This must be used whenever a diagnostic procedure requests
checking or probing a terminal.
Using the appropriate adapter in the special tool will ensure that no
damage to the terminal will occur from the multimeter probe, such
as spreading or bending.
Special Tool
(A): 09932-76010
The adapter will also give an idea of whether contact tension is suf-
ficient, helping to find an open or intermittent open due to poor ter-
minal contact.