Suzuki SY413 Service Manual page 2569

9J-100 AIR BAG SYSTEM
17) Put on a pair of shop gloves to protect your hands from pos-
sible irritation and heat when handling the activated seat belt
pretensioner.
NOTE:
As a precaution, gloves and safety glasses are recom-
mended to prevent any possible irritation of the skin or
eyes.
18) Disconnect the deployment harness from the seat belt preten-
sioner as soon after activation as possible. This will prevent
damage to the deployment harness due to possible contact
with the hot seat belt pretensioner canister. The deployment
harness are designed to be reused. They should, however, be
inspected for damage after each activation and replaced if
necessary.
19) Carefully remove drop cloth from vehicle and clean off any
fragments or discard drop cloth entirely.
20) Repeat Steps 2) through 19) to activate seat belt pretensioner
which has not been activated, if any.
21) In the unlikely event that either or both of the seat belt preten-
sioners proceed immediately with Steps 23) through 25). If the
seat belt pretensioner did activate, proceed with Step 22).
22) With pretensioners activated the vehicle may be scrapped in
the same manner as a non-air bag system equipped vehicle.