Suzuki SY413 Service Manual page 2414

SIDE MOLDINGS
INSTALLATION
1) Bonding surfaces should be cleaned thoroughly.
2) Follow illustrated bonding positions to install side moldings.
3) If adequate adhesive force is not available, use urethane adhe-
sive.
Clearance"a": 2 – 3 mm (0.04 – 0.07 in.)
"b": 0 – 1 mm (0 – 0.04 in.)
BODY SERVICE 9-45
1. Front door molding
2. Rear door molding
3. Quarter outer molding
4. Front door outer R/L
5. Front door outer panel