Suzuki SY413 Service Manual page 2353

DTC11 TRANSPONDER CODE NOT MATCHED
DESCRIPTION:
D DTC11
Immobilizer Control Module checks if Transponder code transmitted from ignition key and that registered in Im-
mobilizer Control Module match when ignition switch is ON. If they do not, this DTC is set.
INSPECTION:
Register ignition key with built-in transponder by using Suzuki scan tool and performing following steps.
1) Register Transponder code in Immobilizer Control Module by performing procedure described in "How To Reg-
ister Ignition Key".
2) Turn ignition switch OFF, then turn it ON and check that DTC11 is not set.
IMMOBILIZER CONTROL SYSTEM (IF EQUIPPED) 8G-19