Suzuki SY413 Service Manual page 2385

9-16 BODY SERVICE
1. Eyeleteer
Adhesive materials and tools required for removal and installation.
One component urethane adhesive and primers used in com-
bination (For one sheet of windshield).
Adhesive (600 g (21.2 oz.))
Primer for glass (20 g (0.7 oz.))
Primer for body (20 g (0.7 oz.))
Primer for urethane (molding) (20 g (0.70 oz.))
Eyeleteer
Piano string
Brush for primer application (3 pcs)
Knife
Rubber sucker grip
Sealant gun (for filling adhesive)
Putty spatula (for correcting adhered parts)
REMOVAL
1) Clean both inside and outside of glass and around it.
2) Remove wiper arms, garnish and spacers.
3) Remove roof molding and windshield upper molding.
4) Using tape, cover body surface around glass to prevent any
damage.
5) Remove rear view mirror, sunvisor, and front pillar trims (right
and left).
6) Remove instrument panel referring to "INSTRUMENT PANEL"
in this section.
7) Remove roof lining referring to "ROOF LINING" in this section.
8) Drill hole with eyeleteer through adhesive and let piano string
through it.