Suzuki SY413 Service Manual page 2245

7C1-20 CLUTCH (HYDRAULIC TYPE)
1. Release bearing
2. Release shaft arm
3. Input shaft
6) Hook return spring.
7) Apply grease to release bearing inside and release shaft arm,
then set bearing.
"A": GREASE 99000-25010 (SUZUKI SUPER GREASE A)
8) Apply small amount of grease to input shaft spline and front end
as well.
"B": GREASE 99000-25210 (SUZUKI SUPER GREASE I)
9) Set release arm to release shaft aligning their punch marks,
then tighten bolt.
Tightening Torque
(a): 13 N·m (1.3 kg-m, 9.5 Ib-ft)
1. Release arm bolt
A: Align punch marks