Suzuki SY413 Service Manual page 2375

9-6 BODY SERVICE
1. Door latch
2. Door latch striker
3. Shaft
1. Body 3. Door latch striker
2. Door 4. Front side
1. Door latch striker
2. Shim
3. Door
INSTALLATION
Reverse removal procedure for installation, and then noting the fol-
lowing instructions.
4. Front side
5. Body
Install door latch striker.
Move door latch striker up and down so that its shaft approxi-
mately aligns with the center of groove (A) of door latch.
NOTE:
Striker should be placed level and moved vertically. Do not
adjust door latch.
Move door latch striker sideways to adjust to 0 mm (0 in.) the
door surface-to-body surface difference with door closed.
In order to correctly obtain door striker position in fore-and-aft
direction, increase or decrease number of spacers inserted be-
tween body and striker to adjust it. Dimension "b" should be ad-
justed to specified value.
Dimension "b": 12.6 – 14.6 mm (0.50 – 0.57 in.)
NOTE:
Apply oil or grease to striker joints periodically.