Suzuki SY413 Service Manual page 2570

ALWAYS PLACE SEAT BELT PRETENSIONER
ON WORKBENCH WITH ITS WARNING LABEL
ATTACHED SIDE FACING UP, AWAY FROM
LOOSE OBJECTS.
23) Remove the inactivated seat belt pretensioner(s) from the ve-
hicle. Refer to Section 9.
WARNING:
D For handling and storage of a live seat belt preten-
D Never carry the seat belt pretensioner by the wires
D When placing a live seat belt pretensioner on
Otherwise, personal injury may result.
24) Temporarily store the seat belt pretensioner with its warning la-
bel attached side facing up, away from the surface upon which
it rests. Refer to "PRECAUTIONS" in this section for details.
25) Contact your local distributor for further assistance.
1. Warning label
sioner, select a place where the ambient tempera-
ture below 655C (1505F), without high humidity
and away from electric noise.
or connector on the underside of the pretensioner.
bench or other surface, always face its warning la-
bel attached side up, away from the surface. As the
live seat belt pretensioner module must be placed
with its warning label attached side facing up,
place it on the workbench. It is also prohibited to
place anything on the warning label attached side
and stack seat belt pretensioners.
AIR BAG SYSTEM 9J-101