Suzuki SY413 Service Manual page 2538

1. Air bag wire harness
2. Ground
3. SDM case ground
AIR BAG WIRE HARNESS AND CONNECTORS
Air bag wire harness can be identified easily as it is covered with
a yellow protection tube. Be very careful when handling it.
D When an open in air bag wire harness, damaged wire harness,
connector or terminal is found, replace wire harness, connectors
and terminals as an assembly.
D When installing it, be careful so that the air bag wire harness is
not caught or does not interfere with other parts.
D Make sure all air bag system grounding points are clean and
grounds are securely fastened for optimum metal-to-metal con-
tact. Poor grounding can cause intermittent problems that are
difficult to diagnose.
DISPOSAL PRECAUTION
Do not dispose of the live (undeployed) air bag (inflator) modules
and the live (inactivated) seat belt pretensioners. When disposal
is necessary, be sure to deploy the air bag according to deployment
procedure described under "AIR BAG (INFLATOR) MODULES
DISPOSAL" and to activate the pretensioner according to activa-
tion procedure described under "SEAT BELT PRETENSIONERS
DISPOSAL" in this section.
WARNING:
Failure to follow proper air bag (inflator) module and seat
belt pretensioner disposal procedures can result in air
bag deployment and pretensioner activation which
could cause personal injury. Undeployed air bag (infla-
tor) module and inactivated seat belt pretensioner must
not be disposed of through normal refuse channels.
The undeployed air bag (inflator) module and inactivated
seat belt pretensioner contain substances that can
cause severe illness or personal injury if the sealed con-
tainer is damaged during disposal.
AIR BAG SYSTEM 9J-69