Suzuki SY413 Service Manual page 2539

9J-70 AIR BAG SYSTEM
REPAIRS AND INSPECTIONS REQUIRED AFTER AN ACCIDENT
CAUTION:
D All air bag system components, including the electrical harness (component mounting points),
must be inspected after an accident. If any components are damaged or bent, they must be re-
placed even if air bag system activation did not occur.
D Never use air bag system parts from another vehicle.
D Do not attempt to service the parts below. Service of these parts is by replacement only.
– Driver/Passenger air bag (inflator) module
– Driver/Passenger seat belt pretensioner (if equipped)
– SDM
– Contact coil and combination switch assembly
– Air bag wire harness
D Proper operation of the sensors and air bag system requires that any repairs to the vehicle struc-
ture return it to its original production configuration.
CAUTION:
After detecting one time of such collision as to meet deployment conditions, the SDM must not be
used.
Refer to "DIAGNOSIS" when checking the SDM.
ACCIDENT WITH DEPLOYMENT
– COMPONENT REPLACEMENT
Certain air bag system components must be replaced. Those com-
ponents are:
D Driver and passenger air bag (inflator) modules
– Replace with new one.
D Driver and passenger seat belt pretensioners (if equipped)
– Replace with new one as an assembly.
D SDM after detecting such collision as to meet deployment condi-
tions
– Replace with new one.