Suzuki SY413 Service Manual page 2854

1. Mounting member
2. Engine front torque bush
3. Engine rear mounting
4. Body
1. Transmission stiffener
2. Transmission 3. Cylinder block
1. Exhaust No. 1 pipe
ENGINE MECHANICAL (G13/G16 TYPE ENGINE) 6A1-25
5) Install mounting member. (2WD only)
Tighten bolts and nut to specified torque.
Tightening Torque
(a): 55 N·m (5.5 kg-m, 40.0 lb-ft)
(b): 45 N·m (4.5 kg-m, 32.5 lb-ft)
6) Remove lifting device. (2WD only)
7) Install transmission stiffener.
Tightening Torque
(a): 50 N·m (5.0 kg-m, 36.5 lb-ft)
8) Install exhaust No.1 pipe.
Tighten bolts to specified torque.
Tightening Torque
(a): 50 N·m (5.0 kg-m, 36.5 lb-ft)
(b): 43 N·m (4.3 kg-m, 31.5 lb-ft)
NOTE:
Use new gasket for exhaust No.1 pipe.
9) Install engine under covers.
10) Refill engine with engine oil, referring to item "ENGINE OIL
CHANGE" in Section 0B.