Dodge Sprinter 2006 Manual page 1967

VA
(2) Tigh t en bolt s t o 25 N·m (18 ft . lbs.).
(3) E n ga ge ch eck a r m in t o r eceiver.
(4) Adju st t h e door a s n ecessa r y. (Refer t o 23 -
BODY/DOORS - RE AR/DOOR - ADJ USTME NTS)
ADJ U ST M EN T S
ADJUSTMENT
NOTE: Door adjustment measurements should be
taken from stationary or welded body panels like
the roof, rocker or quarter panels.
(1) Ch eck door ga p a r ou n d door. (Refer t o 23 -
BODY/BODY STRUCTURE /GAP AND F LUSH
SP E CIF ICATIONS)
(2) Open door s a n d loosen t h e t or x bolt s. (F ig. 8)
Fig. 8 HINGE BOLTS
1 - HINGE
2 - BODY
3 - TORX BOLTS
NOTE: Close and adjust each door individually.
(3) Close t h e door a n d ch eck ga p m ea su r em en t .
(4) Loosen a llen scr ew t h r ou gh h ole in h in ge. (F ig.
9)
-
Fig. 9 HINGE ADJUSTMENT
1 - BODY
2 - ALLEN SCREW
3 - HINGE
NOTE: Adjust so that bottom closing wedges make
contact and door gaps are uniform all the way
around.
(5) Adju st r ea r door a n d t igh t en a llen scr ew t o 25
N·m (18 ft . lbs.).
(6) Open door s a n d t igh t en t or x bolt s t o 25 N·m
(18 ft . lbs.).
(7) Loosen door st r iker a n d a dju st so r igh t door is
flu sh wit h t h e left door. (F ig. 10)
NOTE: Striker should engage in latch at center.
Door should not be lifted or pushed downward with
striker.
(8) Tigh t en st r iker.
DOORS - REAR 23 - 29