Dodge Sprinter 2006 Manual page 1858

21 - 120 AUTOMA TIC TRANSMISSION NAG1 - SERVICE INFORMA TION
REMOVAL
Fig. 122 Remove Electrohydraulic Unit
1 - HEAT SHIELD
2 - ELECTROHYDRAULIC UNIT
3 - BOLT
4 - OIL FILTER
5 - OIL PAN
6 - CLAMPING ELEMENT
7 - BOLT
8 - DRAIN PLUG
9 - DRAIN PLUG GASKET
10 - 13-PIN PLUG CONNECTOR
11 - BOLT
12 - GUIDE BUSHING
(1) Dr a in t r a n sm ission oil by u n scr ewin g oil dr a in
plu g (8) (F ig. 122).
NOTE: If the transmission fluid is burnt or contains
abraded particles, the oil cooler lines and oil cooler
must be flushed out.
Fig. 123 Remove Heat Shield
1 - SCREW
2 - HEAT SHIELD
3 - BOLT
(2) Move select or lever t o posit ion "P ".
(3) Ra ise veh icle.
(4) Rem ove bolt (3) (F ig. 123) a n d scr ew (1) h old-
in g t h e h ea t sh ield (2) t o t h e t r a n sm ission .
Fig. 124 Remove Wiring Connector Plug
1 - PLUG CONNECTOR
2 - GUIDE BUSHING
(5) Discon n ect 13-pin plu g con n ect or (1) (F ig. 124).
Tu r n ba yon et lock of gu ide bu sh in g (2) a n t i-clock-
wise.
(6) Loosen gu ide bu sh in g (2) a n d r em ove fr om
t r a n sm ission h ou sin g.
VA