Dodge Sprinter 2006 Manual page 1952

23 - 14 DOOR - FRONT
(3) In st a ll br a cket on t o ch eck a n d in st a ll br a cket
bolt /n u t .
(4) Tigh t en br a cket bolt /n u t t o 6 N·m (53 in . lbs.).
(5) In st a ll ch eck br a cket on t o a -pilla r.
(6) Apply Loct it e
a n d in st a ll bolt s.
(7) Tigh t en t h e M8 bolt s t o 35 N·m (26 ft . lbs.) or
t igh t en t h e M6 bolt s t o 10 N·m (89 in . lbs.).
(8) In st a ll t r im pa n el. (Refer t o 23 - BODY/DOOR -
F RONT/TRIM PANE L - INSTALLATION)
(9) Con n ect ba t t er y n ega t ive ca ble.
DOOR
REMOVAL
(1) Discon n ect a n d isola t e ba t t er y n ega t ive ca ble.
(2) Rem ove m ir r or. (Refer t o 23 - BODY/E XTE RI-
OR/SIDE VIE W MIRROR - RE MOVAL)
(3) P osit ion a side t h e wir in g boot a n d discon n ect
t h e elect r ica l con n ect or s. (F ig. 3)
Fig. 3 ELECTRICAL CONNECTORS
1 - ELECTRICAL CONNECTORS
2 - BOOT
3 - DOOR
(4) Rem ove t h e bolt s a n d discon n ect t h e door ch eck
fr om t h e a -pilla r. (F ig. 4)
243 sea la n t ch eck st r a p bolt s
Fig. 4 FRONT DOOR CHECK - BODY
1 - DOOR
2 - A-PILLAR BOLTS
3 - DOOR CHECK
(5) Su ppor t door wit h a su it a ble device.
(6) Loosen t h e h in ge set scr ews. (F ig. 5)
Fig. 5 FRONT DOOR
1 - UPPER CHECK BOLT
2 - DOOR CHECK
3 - UPPER HINGE SET SCREW
4 - LOWER HINGE SET SCREW
5 - HINGE RECEIVERS
6 - DOOR
7 - LOWER CHECK BOLT
(7) Rem ove door by lift in g off h in ge pin s.
INSTALLA TION
(1) Slide door in t o h in ges.
(2) In st a ll set scr ews.
(3) In st a ll ch eck br a cket on t o a -pilla r.
(4) Apply Loct it e
a n d in st a ll bolt s.
(5) Tigh t en t h e M8 bolt s t o 35 N·m (26 ft . lbs.) or
t igh t en t h e M6 bolt s t o 10 N·m (89 in . lbs.).
(6) Con n ect a ll door elect r ica l con n ect or s a n d posi-
t ion boot ba ck.
243 sea la n t ch eck st r a p bolt s
VA