Oil Pan Removal - Dodge Sprinter 2006 Manual

9 - 60 ENGINE
1 - O-RING
2 - OIL PUMP
3 - GASKET
4 - WIRING HARNESS DUCT
5 - TRANSMISSION LINE
INSTALLA TION
NOTE: Oil pan bolts are of different diameters and
lengths. Care must be take to install the bolts in
their original position (Fig. 59).
NOTE: Clean the strainer of the oil pump. If the oil
pump is dry, coat the inside with clean engine oil.
NOTE: Thoroughly clean all mating surfaces with
the appropriate solvents to assure that no grease or
oil is present during reassembly.
(1) Slide t h e oil pa n in t o posit ion .
Fig. 57 OIL PAN
6 - CONNECTOR FOR OIL LEVEL SENSOR
7 - OIL PAN
8 - TRANSMISSION LINE
9 - OIL PUMP CHAIN
10 - OIL PUMP CHAIN TENSIONER
(2) Slide t h e ga sket in t o posit ion .
(3) Add sea la n t t o t h e join t s on t h e en gin e block
wh er e in dica t ed (F ig. 58).
Fig. 58 OIL PAN GASKET
VA