Dodge Sprinter 2006 Manual page 1863

VA
1 - 2-3 OVERLAP REGULATING VALVE, SLEEVE, AND PISTON
2 - VALVE HOUSING
3 - SELECTOR VALVE
4 - 3-4 HOLDING PRESSURE SHIFT VALVE
5 - 3-4 COMMAND VALVE
(18) Rem ove a ll va lves a n d spr in gs fr om t h e va lve
h ou sin g (2) (F ig. 133). Ch eck a ll va lves for ea se of
m ovem en t a n d sh a vin gs.
Fig. 134 Pressure Feed Valve Location
1 - PRESSURE FEED VALVE
(19) Rem ove t h e pr essu r e su pply va lve (1) (F ig.
134) fr om t h e va lve body.
AUTOMA TIC TRANSMISSION NAG1 - SERVICE INFORMA TION 21 - 125
Fig. 133 Valve Housing Components
6 - 3-4 SHIFT PRESSURE SHIFT VALVE
7 - 3-4 OVERLAP REGULATING VALVE, SLEEVE, AND PISTON
8 - OPERATING PRESSURE REGULATING VALVE
9 - LUBRICATING PRESSURE REGULATING VALVE
ASSEMBL Y
NOTE: Pay great attention to cleanliness for all work
on the shift plate. Fluffy cloths must not be used.
Leather cloths are particularly good. After dismantling,
all parts must be washed and blown out with com-
pressed-air, noting that parts may be blown away.
Fig. 135 Pressure Feed Valve Location
1 - PRESSURE FEED VALVE
(1) In st a ll t h e pr essu r e su pply va lve (1) (F ig. 135)
in t o t h e va lve body.