Dodge Sprinter 2006 Manual page 1633

VA
Fig. 62 REMOVING OIL PUMP CHAIN TEMPORARY
1 - NEW OIL PUMP CHAIN
2 - OLD OIL PUMP CHAIN
3 - TEMPORARY LINK
CAUTION: Insert new riveted link from the rear.
(4) Con n ect en ds of n ew oil pu m p ch a in wit h n ew
r ivet ed lin k (F ig. 63).
Fig. 63 INSTALLING NEW RIVETED LINK
1 - NEW RIVETED LINK
2 - OIL PUMP CHAIN
LINK
NOTE: When assembling riveting tool, one piece is
secured by a screw and the other can move loosely
on the thrust spindle.
NOTE: The outer plate will be held in place by a
magnet.
(5) P la ce n ew ou t er pla t e in t o t ool in ser t .
NOTE: Ensure that the riveted link and riveting tool
are aligned.
(6) P osit ion r ivet in g t ool over n ew lin k a n d pr ess
in n ew r ivet a s fa r a s t h e t ool st op.
(7) Rem ove r ivet in g t ool t o ch a n ge in ser t s.
(8) In st a ll in ser t on r ivet in g t ool a n d secu r e wit h
scr ew.
(9) In st a ll in ser t on r ivet in g t ool (F ig. 64).
Fig. 64 INSTALLING RIVETING INSERTS INTO
RIVETING TOOL
1 - SPECIAL TOOL #9312-1
2 - SPECIAL TOOL #9312-5 and #9312-9
NOTE: The outer plate is held in place magnetically
by riveting tool.
(10) In ser t n ew ou t er pla t e in t o t h e m ovin g a ssem -
bly in ser t .
(11) P osit ion r ivet in g t ool so t h a t spa cer webs of
t h e gu ide a r e side by side.
(12) E n su r e t h a t r ivet ed lin k a n d ou t er pla t e a r e
a lign ed.
NOTE: When turning spindle of riveting tool, be
sure that pins of riveted link are inserted into holes
of outer plate.
(13) Scr ew in spin dle of r ivet in g t ool u n t il fir m
r esist a n ce is felt .
ENGINE 9 - 63