Dodge Sprinter 2006 Manual page 1955

VA
Fig. 12 EXTERIOR HANDLE
1 - EXTERIOR HANDLE BOLT
2 - LATCH
3 - LATCH BOLTS (3)
(4) Tigh t en bolt t o 10 N·m (89 in . lbs.).
H I N GE
REMOVAL
NOTE: It is not necessary to remove the door to
replace the hinges if they are replaced one at a
time.
(1) Usin g a gr ea se pen cil or equ iva len t , m a r k t h e
posit ion of t h e h in ge on t h e door.
(2) Rem ove side view m ir r or. (Refer t o 23 - BODY/
E XTE RIOR/SIDE VIE W MIRROR - RE MOVAL)
(3) Loosen h in ge set bolt s. (F ig. 13)
Fig. 13 FRONT DOOR
1 - UPPER CHECK BOLT
2 - DOOR CHECK
3 - UPPER HINGE SET SCREW
4 - LOWER HINGE SET SCREW
5 - HINGE RECEIVERS
6 - DOOR
7 - LOWER CHECK BOLT
(4) Rem ove h in ge bolt s a n d r em ove h in ge. (F ig.
14)
Fig. 14 HINGE
1 - HINGE BOLTS
2 - DOOR HINGE
INSTALLA TION
(1) In st a ll h in ge a n d in st a ll bolt s.
(2) Tigh t en bolt s t o 25 N·m (18 ft . lbs.).
(3) Tigh t en h in ge set bolt s.
(4) In st a ll side view m ir r or. (Refer t o 23 - BODY/
E XTE RIOR/SIDE VIE W MIRROR - INSTALLA-
TION)
(5) Adju st door if n ecessa r y. (Refer t o 23 - BODY/
DOOR - F RONT/DOOR - ADJ USTME NTS)
DOOR - FRONT 23 - 17